Field Assembly Sc Apc Drop Cable Fiber Optic Fast Connector
SC fast connector allow you to terminate a fiber in short time. The
fast connect is a pre-polished connector which uses mechanical
clamping and aligning of a cleaved fiber end which is inserted into
the connector body. The fast connect is available in both
singlemode andmultimode (OM1 and OM3 10Gig)and a variety of
connector types and can be terminated onto 250um and 900um coated
fibre as well as 2x3 mm and 2x1.6 mm jacketed cord.
Fast Connector Features
1. Field-installable
2. Fast and easy to terminate
3. Excellent insertion and RL performance
4. Reusable
5. No termination enclosure required.
6. Handles and performs like a factory terminated connector
7. Twin end-face of pre embedded fiber is polished in the factory
8. Fiber optics is aligned in V-groove through the ceramic frrule
Application
1. Direct termination of fibre
2. FTTx networks(FTTH. FTTD)
3. Enterprise/Access networks
4. LAN/WAN
5. Permanent/Temporary replacement/repairs
6. Pre-installation cable drum testing
Fast Connector Parameters
Item | Parameter |
Cable Scope | 2x3mm ,0.9mm |
| Connector Type | SC/APC |
Fiber Diameter | 125μm (G652D, G657A1, G657A2) |
Coating Diameter | 250μm |
Mode | SM |
Operation Time | about 15s(exclude fiber presetting) |
Insertion Loss | ≤ 0.3dB(UPC) ; ≤ 0.3dB(APC) |
Return Loss | ≥50dB for UPC, ≥55dB for APC |
Success Rate | >98% |
Reusable Times | >10 times |
Tighten Strength of Coating | >10 N |
Tensile Strength | >5 N |
Temperature | -40 ~ +85 C |
On-line Tensile Strength Test (20 N) | IL ≤ 0.5dB |
Mechanical Durability(500 times) | IL ≤ 0.5dB |
Drop Test (4m concrete floor, once each direction, three times
total) | IL ≤ 0.5dB |
